TSB
screen printing => Equipment => Topic started by: Frog on July 02, 2012, 06:16:28 PM
-
Has anyone shopped these? For the cheap guns (A.N.C. and Babs) when I called ANC some time back, I think that the nozzle was around $30, more than 1/2 the price of a whole gun.
I believe also that the entire nozzle and extension assembly may be pretty universal.
-
I tried To get one with no luck then I retrofitted one but it failed. Good luck
Sent from samsung gem(the worst smart phone ever)
-
Questions
No luck getting one from ANC?
Failed? The nozzle failed, or it failed to fit? What type gun and nozzle was it?
-
http://albatross-usa.com/Parts/6401.pdf (http://albatross-usa.com/Parts/6401.pdf)
I remember seeing a price list, and don't remember them being too expensive.
-
be careful with your gun and when the nozzle finally quits, BUY A NEW GUN. Those nozzles cost almost as much as a new gun, NOT worth it.
-
easier way around it....
(http://user1523298.sites.myregisteredsite.com/sitebuildercontent/sitebuilderpictures/ZIM/gun.jpg)
Go to...
http://zimchemical.com/id31.html (http://zimchemical.com/id31.html)
all the way at the bottom, it's the K-51. They usually run a special with it for $99 or $129 with a gallon of acetone(I use it for paint stripping). Acetone BTW is actually hard to light, it's not nearly as quick to ignite as you would think. It still doesn't make a very good spot fluid.
The gun is the BEST gun ever. The tips can't break. The trigger went on it, so i slapped a new one in and it worked great.