TSB

screen printing => Screen Making => Topic started by: ericheartsu on August 12, 2012, 09:40:21 PM

Title: Newman Frames/Roller Master Tips and tricks
Post by: ericheartsu on August 12, 2012, 09:40:21 PM

We have an old old old Newman Master here at the shop, and the one guy who knows how to use it is leaving on Wed.! I've been messing around with it all weekend, and i was wondering if anyone has any advice or tips on how to scretch screens, and keep them flat?

I'm mainly using m3's and some Mzx's

Title: Re: Newman Frames/Roller Master Tips and tricks
Post by: jsheridan on August 12, 2012, 09:57:11 PM

First download the manual if you have not already and have a read about how to load the mesh corretly. You can skip the parts after that as they apply to manual wrench rolling.   http://www.stretchdevices.com/sites/default/files/Quick_Stretch_for_4R-English_0.pdf (http://www.stretchdevices.com/sites/default/files/Quick_Stretch_for_4R-English_0.pdf)

Then this will get you started on using the roller master.. a video I made and the thread about it.

http://www.theshirtboard.com/index.php/topic,1254.0.html (http://www.theshirtboard.com/index.php/topic,1254.0.html)