TSB

screen printing => Tips and Tricks to Share (Please don't ask questions here) => Topic started by: 3Deep on August 14, 2012, 04:22:04 PM

Title: Press Parts etc
Post by: 3Deep on August 14, 2012, 04:22:04 PM
I,ve been getting this mag for a year or so, don't know why didn't ask for it but it comes every month free called IEN Industrial Equipment News.  What I found in this mag is parts and more parts motors,quick connect fittings for air lines,servo controllers, warning lights just a hold ton of stuff and I ,m just about sure some of the companies we buy our presses from get parts there as well.  Just thought I would pass this on because I know some us have some older presses and looking for a little better deal on parts.

Darryl
Title: Re: Press Parts etc
Post by: sweetts on August 14, 2012, 09:18:18 PM
thanks just signed up
Title: Re: Press Parts etc
Post by: Orion on August 14, 2012, 09:39:39 PM
Good info Darryl. I think I have posted before the link to Motion Industries (http://www.motionindustries.com/motion3/jsp/mii/index.html), might be worth the time to compare pricing. At any rate, if you are doing repairs on your own equipment, kudos to you sir!
Title: Re: Press Parts etc
Post by: 3Deep on August 14, 2012, 10:41:35 PM
I found the company that actually makes the bulbs for my quarts flash unit and I get them 40 bucks cheaper per bulb.

Darryl
Title: Re: Press Parts etc
Post by: RICK STEFANICK on August 15, 2012, 07:49:33 AM
I found the company that actually makes the bulbs for my quarts flash unit and I get them 40 bucks cheaper per bulb.

Darryl
WHATS THE NAME AND NUMBER OF THAT SUPPLIER?  THANKS
Title: Re: Press Parts etc
Post by: Inkworks on August 15, 2012, 01:25:39 PM
I found the company that actually makes the bulbs for my quarts flash unit and I get them 40 bucks cheaper per bulb.

Darryl
WHATS THE NAME AND NUMBER OF THAT SUPPLIER?  THANKS

Ditto!
Title: Re: Press Parts etc
Post by: 3Deep on August 15, 2012, 02:08:39 PM
Lamp Express USA

Rob sales Rep  1-888-539-8847
Title: Re: Press Parts etc
Post by: RICK STEFANICK on August 15, 2012, 05:20:24 PM
Thanks so much.