TSB
screen printing => Ink and Chemicals => Topic started by: JayzTeez on September 02, 2012, 08:07:19 AM
-
anyone else use this ink? I purschased a gallon because it was on sale i normally use wilflex white tiger. and i noticed when i used the wm it took everything i had to pull the squeeze. that crap is so sticky. i can't wait for this gallon to be gone so i can go back to the wilflex.
-
We have in the past, but not anymore. It's Rutland my shop now.
-
Tried a gallon about a year ago, way too much puff for us. Especially with a thicker stencil and heavy ink deposit, the print raised up off the shirt about 1/16".
-
It has nice coverage, but as Alan said, a bit too much Puff. I keep it around for a few "special" jobs that I try to print with double hit and no flash.
-
I,ve told them in the pass that the ultimate white was kinda thick and to puffy, yep its a bitch to pull manually and kinda the same on an auto until it gets worked up, Jayztees I would get the wm plastics brightwhite its way better, creamy and lays down flat no puff, plus its cheaper than the ultimate white.
Darryl
-
I found the Ultimate white to get even worse the deeper you get into the bucket, by time you got to the end it was like semi cured concrete!