TSB

screen printing => Waterbase and Discharge => Topic started by: tonypep on October 08, 2012, 02:29:34 PM

Title: Discharge on Towels
Post by: tonypep on October 08, 2012, 02:29:34 PM

This is how I do it. Three colors double hit no flash no UB.

Title: Re: Discharge on Towels
Post by: Gilligan on October 08, 2012, 02:47:13 PM

Where are you guys at Tony... I need some lessons. ;)

Title: Re: Discharge on Towels
Post by: Screened Gear on October 08, 2012, 04:40:28 PM

Tony,

Is it just the photo or the towel that makes it look really thick? It looks like plastisol on the towel.

Title: Re: Discharge on Towels
Post by: Gilligan on October 08, 2012, 04:57:06 PM

I assumed that was the nature of the fibers of the towels being soaked with ink.  Towels are "thick" period.

Title: Re: Discharge on Towels
Post by: RICK STEFANICK on October 08, 2012, 07:19:22 PM

i have never seen waterbase bridge like that on a towel. especially discharge.. interesting process you guys must be using..

Title: Re: Discharge on Towels
Post by: jasonl on October 08, 2012, 07:31:36 PM

which system are you using, that red looks amazing?

Title: Re: Discharge on Towels
Post by: tonypep on October 09, 2012, 06:23:48 AM

It's a hybrid system of Vivitone and Rutland WB/PCs and CCI base. The print is uber smooth, you really can't feel it at all. It's not a cheapy towel (towel plus by Anvil) so there is a lot of plush terry. Guess the photo is deceiving. I hate plastisol on towels.