TSB

General => General Discussion and ??? => Topic started by: tonypep on October 11, 2012, 02:05:46 PM

Title: Printwear Magazine
Post by: tonypep on October 11, 2012, 02:05:46 PM
Hey Folks. Looks like I got sucked back into the trade rag biz again. The good news is I should be able to list this forum in the bio. I'll be running a monthly column and will be looking to some of you for installment ideas if you're so inclined. Also If you have a cool pic that pertains to the piece I can submit it for art (no gaurantees but if it gets in you will get credit) First installment is in April and it covers.........you guessed it.......discharge and WB printing prep and techinques. Going for the cover!
Title: Re: Printwear Magazine
Post by: Dottonedan on October 11, 2012, 02:09:39 PM
Congrats!  You would make a great contributor!  Looking forward to reading your stuff.  :)
Title: Re: Printwear Magazine
Post by: tonypep on October 11, 2012, 02:11:46 PM
Thanks Dan you'd think after 70 articles I'd have nothing left to say but a few years break and the birth of this forum has breathed a little life back in me.
Title: Re: Printwear Magazine
Post by: Screened Gear on October 11, 2012, 02:12:49 PM
I can't wait to read your stuff.
Title: Re: Printwear Magazine
Post by: GraphicDisorder on October 11, 2012, 02:16:33 PM
Congrats!
Title: Re: Printwear Magazine
Post by: Denis Kolar on October 11, 2012, 02:27:49 PM
Nice, congrats.
Title: Re: Printwear Magazine
Post by: tonypep on October 11, 2012, 03:01:49 PM
Thanks all. Remember proper credit will be given accordingly (with permission). Those who might not remember The Printers Perspective it was specifically designed not to be overly technical, just a
"this is what works for me now you try" approach and is not product specific. We covered everything from How to develop a Pre-print line to the Ins and Outs of Scheduling to How to survive a Compliance Audit as well as of course, screen printing. We'll be touching on all those subjects with an updated perspective as well as uncovering new ground on occaision. I'll do my best to give nods to this forum as much as I will be allowed.
Maybe we'll attract some new blood instead of the usual scoundrels!
Title: Re: Printwear Magazine
Post by: Orion on October 11, 2012, 03:08:28 PM
Great news Tony, looking forward to some good reading.
Title: Re: Printwear Magazine
Post by: bimmridder on October 11, 2012, 04:39:10 PM
Outstanding Tony. I look forward to reading what you write.
Title: Re: Printwear Magazine
Post by: Action1 on October 11, 2012, 04:53:16 PM
Hey Folks. Looks like I got sucked back into the trade rag biz again. The good news is I should be able to list this forum in the bio. I'll be running a monthly column and will be looking to some of you for installment ideas if you're so inclined. Also If you have a cool pic that pertains to the piece I can submit it for art (no gaurantees but if it gets in you will get credit) First installment is in April and it covers.........you guessed it.......discharge and WB printing prep and techinques. Going for the cover!


Looking forward to seeing more articles Tony. I always read the last ones. They were very well written and informative. We're glad that you're back in the trade rag biz!