TSB

screen printing => Equipment => Topic started by: 3Deep on October 18, 2012, 11:28:03 AM

Title: Anatol Horizon Mini & Titan owners
Post by: 3Deep on October 18, 2012, 11:28:03 AM
Are all our press make equal I know my press has bigger print cylinders and my pallets are larger than listed...on my spec sheet they list pallets for the mini at 16 x 20 mine are 16 x 22.  I would like to know what are your specs on your pallets and any other stuff.

Darryl
Title: Re: Anatol Horizon Mini & Titan owners
Post by: TCT on October 18, 2012, 11:33:32 AM
16 x 20 is what mine came with. I have 16 x 22's also, but don't find they actually gain a whole lot.
Title: Re: Anatol Horizon Mini & Titan owners
Post by: 3Deep on October 18, 2012, 01:13:13 PM
TCT you can get that 18 inch high print on 16x22 if your art is setup right and squeegee angles.

Darryl
Title: Re: Anatol Horizon Mini & Titan owners
Post by: Prosperi-Tees on October 18, 2012, 01:18:19 PM
Hmmm I wonder if you can get the same print on the Titan. I would imagine so. I dont believe there is a difference in machines between the 2.
Title: Re: Anatol Horizon Mini & Titan owners
Post by: Im-Magic on October 18, 2012, 05:23:11 PM
Yes you can but make sure there is room fo your squeegee and flood both ends of the screen
Title: Re: Anatol Horizon Mini & Titan owners
Post by: Printficient on October 18, 2012, 05:53:38 PM
best way to do long prints is no squeegee angle.  Can anyone say double bevel?