TSB

screen printing => Equipment => Topic started by: tonypep on December 04, 2012, 09:53:43 AM

Title: Rebuilt Richmond Graphics Exposure Unit
Post by: tonypep on December 04, 2012, 09:53:43 AM

Rebuilt last week with new bulb, banket, and glass. What you are looking at in the pic is the final step. Cleaned sections of the old blanket are cut up and positioned to be glued to the new blanket in all the predetermined stess points. the paper and tape are for positioning and protect from over gluing. I use the contact cement supplied by the MFGR.

Title: Re: Rebuilt Richmond Graphics Exposure Unit
Post by: tonypep on December 04, 2012, 10:10:38 AM

I know, I know