TSB
screen printing => Equipment => Topic started by: blue moon on June 16, 2011, 10:25:54 AM
-
what are some thoughts on buying a used dryer. The new ones are $30k range for what I need and the used ones are $10k or less.
I realize that the new ones will be more efficient and have better insulation (we are in air conditioned space), but it will be a long time before the $20k difference is spent on the electric bill.
What are the pluses and minuses of the individual models?
-
Personally, if you have the money, go new. They are more efficient, they are usually warranted, and you can get some decent deals on them right now.
I have an interchange md-8 and love it. I wouldn't go back to radiant panels after using gas. Just get the longest chamber you can fit or afford. ours is 12 and I'd like it to be 16.
-
I cant think of a piece of equipment that can ruin you faster...do the best you can, and do a bunch of shirts not cured correctly. Spend the most for your budget on for DRYER.
-
I have a list of dryers I'm looking at too -so far the Precision is in the lead -but still looking at the M&R's, It's hard to tell what condition they are in without actually seeing it in person -even then I don't know what the hell I'm looking at. Brand new may be the way to go, you will never have to replace it -you'll retire first. But on the other hand, if you find a nice refurb, the same can be said about that, if it was maintained properly. Saving 20g to put towards another auto.
what are your requirements? I'm looking at 60" belt minimum, 10ft of heat, not too sure about the in/out length yet.
-
you need to go more than 10' of heat. I have 12 and wish I had 16'. Also, with the interchange dryers, they are modular, so you can add more heat down the road.
When precision went tits up, a lot of people went to interchange. I couldn't be happier with my interchange dryer...except I ordered it too short.
-
my thinking is . . . we have one auto now and should be getting another one within few years. With two autos running at 700-800 (not very often, but it will happen) we'll need 1400-1500/hour capacity.
not sure what happens when we start running waterbased and discharge though.
I like the modular idea. start small and add as we grow.
-
. . .how wide is your belt? I have been told many times to go as wide as I can. We may have 2 autos to feed -or a larger one, I'm not too sure yet. I'm thinking of keeping the 6 color because it's here, it's paid for and what can I really get for it?
And like Pierre says, what about WB and discharge - 10' may not be enough. Although we do it now with our electric dryer.
-
With discharge, go longer.
if you want to fee 2 autos, go 60" it just gives you a little more real estate.
-
Good thread.
The problem for me with used gas dryers is I don't know the first thing about natural gas fired machines so I shyed away from it for fear of shipping myself a terminally ill piece of equipment. I'd be hesitant to buy a used boiler for my home, for example and would want a professional to check it out first. With electric, no problem to do repairs for the most part- rewire a new panel, fuses, controls, etc., you just need the part and the schematic really. What do you look for with gas and what can go wrong with one of those dryers that would cost more than outright replacement and/or render it scrap?
I would think a 60" wide split belt would be where it's at for a dryer being fed by two presses.
I cant think of a piece of equipment that can ruin you faster...do the best you can, and do a bunch of shirts not cured correctly. Spend the most for your budget on for DRYER.
Agreed 100%. I don't care if you print manually, auto, whatever, you outgrow the dryer first and it's usually the biggest pain in the arse to replace.
-
I love dryer talk, I have been researching them for a while now. Knowing what I know about our dryer, I wouldn't really be hesitant in buying a used dryer. They are so simple and ours is 20+ years old and it just cures shirt after shirt so I think a late model that fits our needs won't be near the risk of buying a used auto. I just want something that is cool to the touch and won't kill us with heat when we finally air condition the shop, oh, and be very efficient as well.
-
I love dryer talk, I have been researching them for a while now. Knowing what I know about our dryer, I wouldn't really be hesitant in buying a used dryer. They are so simple and ours is 20+ years old and it just cures shirt after shirt so I think a late model that fits our needs won't be near the risk of buying a used auto. I just want something that is cool to the touch and won't kill us with heat when we finally air condition the shop, oh, and be very efficient as well.
something I've been trying to find out:
is there a dryer that can draw the combustion air from the outside? Being in an air conditioned shop, I would prefer to burn the outside air rather then the air I just cooled down.
M&R said that their big dryers do not have a central opening and it would be difficult to pipe the air in. I think I asked Anatol the same question and received the same answer. my guess is they all draw the air from all over the place just to keep everything cool.
-
the interchange has a vent on the side that I am sure you could work some sort of an induction system for.
-
http://www.digitsmith.com/american-texair-60-gas-electric-26419.html (http://www.digitsmith.com/american-texair-60-gas-electric-26419.html)
I saw this on a "troll site"
Not a 12' long, but someone might like it.
-
the infrared panels will help the heat most certainly.
-
[url]http://www.digitsmith.com/american-texair-60-gas-electric-26419.html[/url] ([url]http://www.digitsmith.com/american-texair-60-gas-electric-26419.html[/url])
I sow this on a "troll site"
Not a 12' long, but someone might like it.
That's a badass dryer, we have one similar but ours is 48" and it will handle 2 autos fairly easy, so that 60" will do it with ease.
-
Everyone's experience is going to be different but we were fortunate when we bought a used gas dryer a few years back.
We all obviously understand we are not going to get the most efficient dryer out there buying used, but as long as it is not too old it will be a solid investment. I think all of us would love to buy everything we need new; however it is not a reality. The way I look at, unless you have everything else you need in your shop, that 20k you are saving could go to use elsewhere.
As everyone else said get the longest chamber you can fit/afford and a 60" belt where you can fly with two autos. We actually have a 72" belt so if you have to run the belt slow for waterbase/discharge you can fit 4 shirts across, unless the print is huge.
My advice would be buy used as long as you are comfortable with the dryer AND who you are buying it from.
Mark
-
I will keep this answer short.
Winston Strickland
760-809-2933
The freaking GURU of dryers.
-
I will keep this answer short.
Winston Strickland
760-809-2933
The freaking GURU of dryers.
who is he?
-
I will keep this answer short.
Winston Strickland
760-809-2933
The freaking GURU of dryers.
who is he?
Can't you read? He's the freaking GURU of dryers! lol! :D
-
Andy, isn't it great to have a straight man? 8)
-
Andy, isn't it great to have a straight man? 8)
You'd have to ask my wife that one, as if I had one, he wouldn't be straight, would he?
Not that there's anything wrong with that, of course.
appropriate sound effect (http://instantrimshot.com/classic/?sound=rimshot)