TSB

screen printing => Equipment => Topic started by: Palmetto7 on June 27, 2011, 05:28:55 PM

Title: Javelin Help
Post by: Palmetto7 on June 27, 2011, 05:28:55 PM

I am rebuilding a 1991 Javelin and need photos of the following air lines to the back of following MAC Valves:

air flow in ------------  single valve  (Power On) -----------------  3valves (Indexer, Table up, locator)------------  Print on (Dump Valve)


I need to see what lines are attached to each Valve and attached to specific cylinders. I have all print valves and cylinders completed.

I appreciate your help.

David

Title: Re: Javelin Help
Post by: blue moon on June 27, 2011, 06:39:37 PM

Hi David,

welcome aboard, hopefully somebody can help!

pierre

Title: Re: Javelin Help
Post by: Palmetto7 on June 27, 2011, 06:51:48 PM

I'm very thankful to find a site without the Drama.

Title: Re: Javelin Help
Post by: Printhouse on June 27, 2011, 11:46:44 PM

I sent you one pic.... I can take pics of what you need tomorrow.  I have mine wide open right now.

Title: Re: Javelin Help
Post by: Palmetto7 on June 28, 2011, 07:30:40 AM

After the air comes into the 1st valve (start Valve) where does that air line go?  Also, where does the line on the far right (Print and dump valve) go out to?

Thank you,
David

Title: Re: Javelin Help
Post by: inkman996 on June 28, 2011, 08:36:11 AM

Not sure if you tried calling workhorse yet if not you really should those guys will bend over backwards to help you get it running even if it is an old machine you did not buy from them.

Title: Re: Javelin Help
Post by: Palmetto7 on June 28, 2011, 08:44:29 AM

I left message with them yesterday and not heard back yet.

Title: Re: Javelin Help
Post by: garagewear on July 30, 2011, 11:02:01 PM

Did you get it going yet?

Title: Re: Javelin Help
Post by: rmonks on July 31, 2011, 04:57:25 PM

You should call Phil at Workhorse 602-437-2305. Or email pritz@2mfg.com

Title: Re: Javelin Help
Post by: rmonks on July 31, 2011, 04:59:36 PM

David If you will send me youre email address I will send you a pdf of the Javelin manual

Title: Re: Javelin Help
Post by: Palmetto7 on July 31, 2011, 06:44:32 PM

I just sent you my email in a PM.

Thanks.

Title: Re: Javelin Help
Post by: rmonks on July 31, 2011, 08:29:24 PM

David: I have problems with the email address i have listed. Try this one. rmonks@cox.net

Title: Re: Javelin Help
Post by: Palmetto7 on July 31, 2011, 10:32:59 PM

Thanks for the manual download. A tremendous help. Thanks again.

Title: Re: Javelin Help
Post by: Palmetto7 on August 20, 2011, 06:06:39 PM

Found the source of the major air leak.... It was the start dump valve that was stuck. Appreciate everyones help. Now starting to stop other minor leaks.