TSB

screen printing => Waterbase and Discharge => Topic started by: kingscreen on April 18, 2013, 11:26:49 AM

Title: Inside Out Print on Tultex blend
Post by: kingscreen on April 18, 2013, 11:26:49 AM

I didn't want to hi-jack Tony's thread but wanted to post the recent project we did for Tultex. They supplied us with their new & improved blend tees and we discharge printed them mirrored from the inside out. I think that using the blend tees created even more of a "burnout" look versus 100%. End result came out really cool in our opinion. Tultex was happy and so were we!

Title: Re: Inside Out Print on Tultex blend
Post by: tonypep on April 18, 2013, 11:37:34 AM

Nice.......Try using a little water in the ink and use a crush screen if nec. This really getting some attention from our OSDS line and biz to Biz

Title: Re: Inside Out Print on Tultex blend
Post by: ericheartsu on April 18, 2013, 11:55:17 AM

whats a crush screen?

Title: Re: Inside Out Print on Tultex blend
Post by: tonypep on April 18, 2013, 12:00:53 PM

Stenciled, no imaged screen with base as a lube. Helps drive the ink through

Title: Re: Inside Out Print on Tultex blend
Post by: ol man on April 18, 2013, 06:55:05 PM

Hey King Screen,
    Saw that print in person -- well done Sir.

Title: Re: Inside Out Print on Tultex blend
Post by: IntegrityShirts on April 19, 2013, 09:29:08 AM

I dig it.  I ordered a couple of the new blends with my last AA order.  They seem a bit more substantial than the previous blends and possibly more consistent and true to shape, although I only ordered two.

Title: Re: Inside Out Print on Tultex blend
Post by: tonypep on April 19, 2013, 09:46:59 AM

This is turning out to be huge with us. They went nuts at Surf and they were the hit at a recent OSDS show.

Title: Re: Inside Out Print on Tultex blend
Post by: kingscreen on April 19, 2013, 02:09:26 PM

Quote from: ol man on April 18, 2013, 06:55:05 PM

Hey King Screen,
    Saw that print in person -- well done Sir.

Thanks!  8)

Title: Re: Inside Out Print on Tultex blend
Post by: ericheartsu on April 19, 2013, 02:26:58 PM

because of this thread, we are doing a job like this next week.

Title: Re: Inside Out Print on Tultex blend
Post by: ericheartsu on April 19, 2013, 02:27:20 PM

well, this thread and every thread tony posts.