TSB

Computers and Software => Computers and Software - General => Topic started by: easyscore on April 21, 2013, 11:37:39 AM

Title: Epson 4880
Post by: easyscore on April 21, 2013, 11:37:39 AM
I have an Epson 4880 that is constantly giving me the reload paper error. It has given me the error even after it has printed a sep. Any suggestions before I go Office Space on it?

Thanks!
Title: Epson 4880
Post by: Get Shirts on April 21, 2013, 12:12:46 PM
Roll or sheet?  Do you the right kind if media selected? 
Title: Re: Epson 4880
Post by: Homer on April 21, 2013, 05:54:28 PM
if it's like my 4800, there is a sensor back there on the infeed. make sure it's clean. take some air and give it a shot...it also does this if the film isn't straight, so double check your going in straight. I line up the film to the horizontal cut line and square it up.
Title: Re: Epson 4880
Post by: easyscore on April 21, 2013, 06:13:44 PM
Roll.

I threw in a new roll of film and it worked.

I just fed the old roll and used the compressed air trick and that worked too.

Thanks!


Title: Re: Epson 4880
Post by: DCSP John on April 22, 2013, 07:01:01 AM
you can turn the 'paper skew' off in the main console.