TSB
screen printing => Waterbase and Discharge => Topic started by: DCSP John on May 10, 2013, 09:22:27 AM
-
Hi Everyone..
Heather Navy / Gildan with bright red discharge.
We would normally add 6% activator and go to town, but I remember reading recently
that a lower amount of activator might make the red pop a little bit more.
We use the Rutland WB series discharge. We will try a few mixes and step down the activator
as we go. Any words of wisdom before starting the project? I can't seem to locate the old thread.
Thanks. John