TSB

screen printing => Waterbase and Discharge => Topic started by: 3Deep on June 04, 2013, 05:46:53 PM

Title: Discharge White
Post by: 3Deep on June 04, 2013, 05:46:53 PM

I know this has been talked about a million times and if I look hard enough I might fine a topic on it...anyway I'm printing some black tees in the morning, I would like to use my CCI discharge, but last time I did it look grey on black Tees so I went with the regular plastisol...any tips

Darryl

Title: Re: Discharge White
Post by: ebscreen on June 04, 2013, 05:48:27 PM

Correct mix (5% activator, a splash of water if it's dry where you live) correct printing (110-305 mesh, heavy pressure,
softish squeegee) correct heating (320 for 2 min+).

Look for penetration of the ink on the inside of the shirt. The more the better, to an extent.