TSB

screen printing => Screen Making => Topic started by: cbjamel on June 12, 2013, 08:23:34 PM

Title: How to linearize a 4800 printer
Post by: cbjamel on June 12, 2013, 08:23:34 PM

What is required or needed to linearize a 4800 printer with Garment Decorating Supply version of rip (called Quickfilm ie.. Cadlink) version 10. Running 1 ink cart rest are cleaning carts. Rolled film.

Thanks for the feedback, we are trying to improve our printing.

Thanks,
Shane
Creations By Ja-Mel
cbjamel at msn.com

Title: Re: How to linearize a 4800 printer
Post by: blue moon on June 12, 2013, 08:35:40 PM

remind me tomorrow and I'll send you the file to print and send back for the readings.
once read, I'll give you the numbers to put in the adjustment curve (not sure where that is in the older version of the software, but it should be there somewhere). This will get you within 2% across the board (for the most part).

pierre

Title: Re: How to linearize a 4800 printer
Post by: ebscreen on June 12, 2013, 08:50:02 PM

I'm gonna take you up on this too Pierre if you don't mind.

FilmMaker is incredible.

Title: Re: How to linearize a 4800 printer
Post by: blue moon on June 12, 2013, 09:58:17 PM

start here:
http://www.theshirtboard.com/index.php/topic,8018.0.html (http://www.theshirtboard.com/index.php/topic,8018.0.html)

and PM for the address to send the films or go to bmpromotional.com and pull the address from the web site.

pierre