TSB

screen printing => Waterbase and Discharge => Topic started by: noortrd on July 30, 2013, 10:18:43 AM

Title: emulsion
Post by: noortrd on July 30, 2013, 10:18:43 AM

Whichis best one pot emulsion . MACDERMID PLUS 9000, QTX , CHROMATECH , CCI PFX HV.

Title: Re: emulsion
Post by: Printficient on July 30, 2013, 11:00:43 AM

IMHO Xenon Nova or QTX

Title: Re: emulsion
Post by: stitches4815 on July 30, 2013, 11:49:41 AM

I am kinda partial to Imagemate 701.

Title: Re: emulsion
Post by: mk162 on July 30, 2013, 12:46:00 PM

the best 1 part in my book is Imagetechnology ITX, but it will only last about 3 seconds with discharge inks, so it's def a plastisol only ink.

Title: Re: emulsion
Post by: spotcolorsupply on August 23, 2013, 08:33:08 AM

If you want a one pot that works with discharge we have customers using Saati PHU (Post Exposed) for 500+ prints with no hardener.

And we also have the Image Technology ITX that brad mentioned above  ;)

Title: Re: emulsion
Post by: Gilligan on August 23, 2013, 09:11:19 AM

This question was one of the reasons that I created this document.  It was in hopes to get some solid data that could be extrapolated for others to be able to make judgments on emulsions quickly and easily.

Maybe it can still be used as people add to it.

https://docs.google.com/spreadsheet/ccc?key=0AgdPJ7c6eSh6dFZ4bVBSTFVXZzZ5eFNvX3JyVk9vQ0E

Title: Re: emulsion
Post by: mk162 on August 23, 2013, 09:39:23 AM

I like it, there just needs to be a way to organize it better.  maybe by rating or brand or something.

I would like to add a couple things to it, i will see if I have time.

Title: Re: emulsion
Post by: Gilligan on August 23, 2013, 09:43:58 AM

It should be able to be sorted quite easily.

That is the idea... once there is a substantial amount of data then playing with the data should be easy.

I just think we need a larger sampling of data before we get too crazy with the cheese-whiz.

Title: Re: emulsion
Post by: kingscreen on August 23, 2013, 10:41:04 AM

Try Imagemate 343.

Title: Re: emulsion
Post by: Frog on August 23, 2013, 10:48:06 AM

Just a note, our friend noortrd, the OP, is in Pakistan, I believe, so access to as many choices as we have may be a dream, and he may be stuck with only the choices he gave.

In fact, noortrd, from whom do you get your supplies?

Title: Re: emulsion
Post by: SeñorPepperHead on August 23, 2013, 11:18:58 AM

CCI has a new one pot called VPR that is water resistant right out of the bucket. If you post expose you could easily print discharge in excess of 1,000 impressions with no hardener.

Title: Re: emulsion
Post by: easyscore on August 23, 2013, 02:49:30 PM

Saati PHU. Post expose and if I'm lucky and it's sunny leave it outside for a bit.

I have run a couple 400 pcs jobs with no issues, smaller jobs not a problem.