TSB
Computers and Software => RIPs => Topic started by: Mark @ Hurricane Printing on August 01, 2013, 07:18:49 AM
-
I have T-Rip (with an Epson 3000 printer) and I have encountered a problem last night which never happened before. I had some Sep's professionally done and emailed to me. The Sep's were done in Photoshop, but I was printing them thru CorelDraw X5, which I have done in the past with zero problems.
So last night I did my usual routine: create a layout coreldraw x5...import (place) the image....chose the T-Rip driver...get all of my settings correct, exactly like I have done in the past....when I clicked "print", T-Rip opens up as it should and few minutes into it I get this pop up window which I have never received before:
CADPDF: CADlink PDF Interpreter
CADlink PDF Interpreter has encountered a problem and needs to close. We are sorry for the inconvenience.
I did reboot my entire system plus turn the printer off and back on and I still get the same pop up window. So what would make that happen all of the sudden? I am using an Epson 3000. I have to get this resolved today because I was printing films for a rush job due tomorrow.
-
Mark try printing each sep on a page by themselves, I use a cadlink rip and for some reason it won't print my white plate with the other seps, so I break it out on a page of its own.
Darryl
-
Mark try printing each sep on a page by themselves, I use a cadlink rip and for some reason it won't print my white plate with the other seps, so I break it out on a page of its own.
Darryl
Tried it when I was troubleshooting it last night, with no luck. Actually it was the only way I can print these seps. I open one image, place it in coreldraw x5..and go through the normal process of printing with T-Rip.
-
Can you import the PDF directly in TRip and set your halftones there?
-
Contact Scott directly! He knows quite a bit about his product and should be able to assist you!
pierre
-
Contact Scott directly! He knows quite a bit about his product and should be able to assist you!
pierre
Well hell Pierre, he should it's his product somewhat LOL
Darryl
-
Got it working...i had to upgrade ..my version was dated..upgrade was free.