TSB

screen printing => Waterbase and Discharge => Topic started by: DCSP John on September 18, 2013, 09:19:18 AM

Title: Discharge on GILDAN 18500 Blend Hoodies...(Dark Heather, Charcoal)
Post by: DCSP John on September 18, 2013, 09:19:18 AM

Hi All..

Anyone have success in discharging either of these colors on the Gildan 18500 Hooded?
Would love to use my new CCI pre mix flouros  for  vibrant pop.
Wondered if we would get the same great  results as we do when discharging Gildan heather tees...

Thanks.

John

Title: Re: Discharge on GILDAN 18500 Blend Hoodies...(Dark Heather, Charcoal)
Post by: Sbrem on September 18, 2013, 10:32:18 AM

gildan's discharge chart says all of their heather colors are rated "A". But, the G18500 is a 50/50, not 100%... test, test, test.

Steve

Title: Re: Discharge on GILDAN 18500 Blend Hoodies...(Dark Heather, Charcoal)
Post by: tonypep on September 18, 2013, 11:36:44 AM

Can't be specific but..........I wouldn't necessarily trust the chart. I have tested all Gildan, Canvas, NL, Anvil etc

Title: Re: Discharge on GILDAN 18500 Blend Hoodies...(Dark Heather, Charcoal)
Post by: DCSP John on September 18, 2013, 11:50:33 AM

Hi Guys..

Testing it is. Will run a sample and post my results..

Sbrem - All my Gildan Heathers are listed as 50/50 and discharge amazingly...

On a side note - we ran some trials with CCI flouros and were super impressed.
We have gotten really good at our recipes for ourRutland  flouro  pigs, but these out of the bucket
pre mixes are great go to colors..

John