TSB
General => Introduction => Topic started by: northstargraphix on October 08, 2013, 09:10:44 PM
-
Thought I would take a brief second to say hi. Very, very, very long time lurker on this board as well as many others. A bit about me, I started in the screen printing industry back in 1989 and in 1999 started my own shop. In 2003 we switched to strictly contract printing and over the years I have been truly blessed with the folks I have had the fortune to work with. Few years back I got into used equipment since we had a lot of dealings with other shops and it kind of snowballed on me and about 2 years ago started getting more involved with the supply side of things as well as getting started selling new machines. I have been certified by Anatol for tech and install work and have over the years ran a lot of different presses as well as working on them. Well, that's about the short and sweet of it. I hope I might be able to visit here and post from time to time, and if there is something I might be able to help you with, please just ask.
-
Glad that a long time lurker finally took the big step and joined up. welcome aboard.
-
Nice to have you here! It will be nice to have another tech's opinion on the boards.
You have already been very forthcoming, which is great!
-
Welcome aboard. Thanks for taking that leap from lurker to contributor. Much appreciated. We always like to build on the content available with other or new opinions.
Thanks
Dan
-
I am glad that there will be someone who can represent Anatol. Not quite in an official way if I am reading your post correctly, but you would have a ton of experience with the machines. Maybe you could drag a rep from Anatol out of the woodwork to post here? I really like that we have some posters who rep companies that we buy from and I feel the more the merrier.
-
Thanks for the welcome, I do appreciate that.
I am glad that there will be someone who can represent Anatol. Not quite in an official way if I am reading your post correctly, but you would have a ton of experience with the machines. Maybe you could drag a rep from Anatol out of the woodwork to post here? I really like that we have some posters who rep companies that we buy from and I feel the more the merrier.
Well I cannot technically speak for Anatol themselves, but I am a dealer, tech etc. for them and I am willing to do as much as I can to shed as much light on any press issues or help with any possible solutions to a problem as best I can, with the resources at my disposal, such that they are.
Once again, Thanks for the warm welcome, and I am looking forward to some good discussions with yall.