TSB

screen printing => General Screen Printing => Topic started by: Ryan on November 18, 2013, 02:14:16 PM

Title: Foam Fingers etc
Post by: Ryan on November 18, 2013, 02:14:16 PM

Quick look couldn't find anything so....has anyone printed these? how do you do it? what kind of ink. normally i would let an ASI company handle but its a rush...Surprise! so trying to see if I could print these myself. any help would be much appreciated as I need to order today in order to get the blanks here in time to do them.
~ryan

Title: Re: Foam Fingers etc
Post by: royster13 on November 18, 2013, 02:50:59 PM

Phone Nazdar.....They have a great knowledge of printing on almost anything....

Title: Re: Foam Fingers etc
Post by: ericheartsu on November 18, 2013, 02:55:32 PM

Would also call Nazdar!

Title: Re: Foam Fingers etc
Post by: Rob Coleman on November 19, 2013, 02:02:53 PM

You can generally print a standard plastisol on these. Foam should be able to take the heat.  Even if you have to turn the heat down a bit, you are okay to undercure a bit since these wont be washed.  Really depends upon the content of the foam.  Do you have one to test?

Ymmv as they say!


Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1) 2

Title: Re: Foam Fingers etc
Post by: tonypep on November 19, 2013, 02:15:29 PM

A LCA added to plastisol would work.
Miley might still have some props you could borrow :)

Title: Re: Foam Fingers etc
Post by: Ryan on November 19, 2013, 03:10:32 PM

I passed on this round. Wouldn't have gotten the fingers until Friday and they would have needed them on Friday so I really didn't want to scramble for this time around.

Miley sent me a personal autographed one, so that was nice of her!!!