TSB

screen printing => Waterbase and Discharge => Topic started by: noortrd on November 20, 2013, 10:53:23 AM

Title: two layer magna discharge super white
Post by: noortrd on November 20, 2013, 10:53:23 AM

For better brightness we print two layer of magna super discharge white.  But washing failed. But i we print single layer the washing ok.  Is ther any help?

Title: Re: two layer magna discharge super white
Post by: alan802 on November 20, 2013, 11:44:43 AM

Are you talking just a double stroke or a print, flash, print?  The DC whites don't accept other inks on top of them from the little bit of testing we've done.  It's not like printing on top of a plastisol underbase at all.

Title: Re: two layer magna discharge super white
Post by: Parker 1 on November 20, 2013, 11:53:32 AM

Try using strait DC base or 80/20 mix for your first white, then print 100% white on top.  We have done this with good results.  Posted this pic last week in another thread, base was a DC 50/50 mix and the top was strait Dwhite. 

Title: Re: two layer magna discharge super white
Post by: ebscreen on November 20, 2013, 01:06:11 PM

You're printing it like plastisol and not WB. You need to get it into the fabric and be able to see the ink inside the garment.
We're through the looking glass here people.