Author Topic: ARRRRGGGGHHHHH  (Read 2392 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6057
ARRRRGGGGHHHHH
« on: April 15, 2016, 11:58:26 AM »
OK, I've done this a million times, but today I'm getting this message, and can't figure out what to do, please help me before I go crazy... It's a Photoshop file, RGB, with channels, and so far I've saved it as .psd, and as a .dcs, which is then placed into Illustrator for output, I printed the other side of the shirt's image yesterday the same way...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't


Offline 1964GN

  • Hero Member
  • *****
  • Posts: 833
Re: ARRRRGGGGHHHHH
« Reply #1 on: April 15, 2016, 12:33:12 PM »
I have never seen that BUT... make sure your channel names are not names reserved for CMYK or RGB. For example, If you have a channel in your seps name "red" change it to something like "spot red" etc

Just a thought

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13982
  • Docendo discimus
Re: ARRRRGGGGHHHHH
« Reply #2 on: April 15, 2016, 12:33:47 PM »
Could this be a "version" issue? Are you using fresh stuff on your machine?
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6057
Re: ARRRRGGGGHHHHH
« Reply #3 on: April 15, 2016, 12:47:24 PM »
CS6 for both PS and Illy, and note the names, though I may change them again, because I have changed the names a couple of times already thinking there was a conflict... really bizarre, because as I said, I've done this hundreds of times...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6382
Re: ARRRRGGGGHHHHH
« Reply #4 on: April 15, 2016, 02:16:15 PM »
in illy swatches, double click on the ones showing black and it will let you assign the color. easy, peasy!

pierre
Working on a new web page, we have two for now. Bluemoonscreenprint.com and promodecorators.com.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6057
Re: ARRRRGGGGHHHHH
« Reply #5 on: April 15, 2016, 02:43:10 PM »
in illy swatches, double click on the ones showing black and it will let you assign the color. easy, peasy!

pierre

I was thinking that, but no longer trusted my instinct, lol... I switched the names to proper names, and Voila! Jeez, you'd think I'm a newbie

Steve
I made a mistake once; I thought I was wrong about something; I wasn't