Author Topic: DTG printers from China?  (Read 2886 times)

Offline xman

  • Newbie
  • *
  • Posts: 5
DTG printers from China?
« on: April 21, 2014, 04:12:37 AM »
Hi there,
 Wish you good luck!
« Last Edit: November 06, 2014, 10:44:01 PM by xman »


Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2059
Re: What do you think of DTG printers from Asia?
« Reply #1 on: April 21, 2014, 04:45:14 AM »
Hi everyone,
I was considering of buying a DTG printer and searched from all over the world. Finally I found out some DTG printer manufacturers. Here is one from Asia.www.tshirtprinterkr.com It attracted me by its low price. What do you think about? Or should I turn to the local market?

If you buy a DTG printer from "Asia" I would really go for Brother or Epson. Do yourself a favour and do not buy the Chinese or Korean product, you will end up with no support.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7795
Re: What do you think of DTG printers from Asia?
« Reply #2 on: April 21, 2014, 09:11:14 AM »
rockers is correct.  I can tell you from the little I have needed support, Brother is killer.  The guy in the phone support department goes above and beyond.  Sending followup emails, updated documentation, etc.

Remember, this is where the Fast T-jet came from...an asian company that was making shirt printers, it didn't work out so well for US Screen Print

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6042
Re: What do you think of DTG printers from Asia?
« Reply #3 on: April 21, 2014, 10:51:24 AM »
You've probably heard about getting what you paid for. A cheap price usually means cheap product. We have a Brother, and because they built their machine from the ground up instead of re-purposing a desktop Epson, they have less problems. That being said Epson's latest is built from the ground up for shirts...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: What do you think of DTG printers from Asia?
« Reply #4 on: April 21, 2014, 05:37:57 PM »
Right now I wouldn't bother with anyone other than Brother or Kornit. Prices are coming down and production numbers from these machines are getting better. Once they start to level off it's time to buy, but not before i.m.o.
Wishin' I was Fishin'

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: What do you think of DTG printers from Asia?
« Reply #5 on: April 21, 2014, 07:35:32 PM »
It attracted me by its low price. What do you think about?

attracted by it's low price..  you're going to learn a very hard lesson when you buy equipment in this trade just because it's lowest priced.

You have been warned.

Just as a reference.. my company now owns 8 Kornit Avalances because of what they do for us.. not because of how much they cost
Blacktop Graphics Screenprinting and Consulting Services

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: What do you think of DTG printers from Asia?
« Reply #6 on: April 21, 2014, 07:39:34 PM »
ROnce they start to level off it's time to buy, but not before i.m.o.

If you have not yet bought one, you are already behind the times.

I'll tell you guys now.. don't wait any longer. Get into digital NOW
Blacktop Graphics Screenprinting and Consulting Services

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: What do you think of DTG printers from Asia?
« Reply #7 on: April 21, 2014, 09:52:34 PM »
I'll take one Avalanche,.... Someone lend me a cool quarter million quick! ;)
Wishin' I was Fishin'

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: What do you think of DTG printers from Asia?
« Reply #8 on: April 22, 2014, 09:56:55 AM »
I'll take one Avalanche,.... Someone lend me a cool quarter million quick! ;)

Ask Hirsh or go direct with Kornit, I hear they have some nice terms.
Blacktop Graphics Screenprinting and Consulting Services