Author Topic: Light source spacing  (Read 932 times)

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2870
Light source spacing
« on: December 08, 2014, 01:01:52 PM »
Does anyone know or can someone point me to the post that talks about spacing for a "flip table" vacuum table and say a Olec unit? The distance between the two. I could of swore there was a thread that talked about where to start in terms of spacing.

Anyone?
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: Light source spacing
« Reply #1 on: December 08, 2014, 01:17:20 PM »
about the diagonal of the area (screens) you are exposing. . .

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2870
Re: Light source spacing
« Reply #2 on: December 08, 2014, 01:36:58 PM »
Thank you wise sir! I will start there.
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Light source spacing
« Reply #3 on: December 08, 2014, 01:48:47 PM »
This sheet from the old AL53 manual ought to help.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: Light source spacing
« Reply #4 on: December 08, 2014, 01:51:36 PM »
Somewhere aprox 1.5 times the diagonal of screen, before I had MSP3140 I had a flip top with a carbon arc exposure unit.
So totally understand it.
Shane

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4243
Re: Light source spacing
« Reply #5 on: December 08, 2014, 02:07:06 PM »
With the Olec's at least, it really depends on the reflector used. Some are super wide, others not so much.