Author Topic: How would you print this? (Read 800 times)

Prosperi-Tees · « **on:** March 30, 2016, 03:04:10 PM »

Elastic bandages. The print does not look very good from what they got previously but were satisfied with them.

im_mcguire · « **Reply #1 on:** March 30, 2016, 03:05:37 PM »

I would make a screen print transfer, and then heat press it...

Colin · « **Reply #2 on:** March 30, 2016, 03:11:48 PM »

Waterbase.

But does it need to stretch with the bandage?

Sbrem · « **Reply #3 on:** March 30, 2016, 04:04:03 PM »

You are going to unroll, print, dry and re-box too? Arrrrgggghhhhh!!!!!!

Steve

Prosperi-Tees · « **Reply #4 on:** March 30, 2016, 04:14:53 PM »

Not too sure if those bandages stretch too much. Looks like I wouldn't have to unroll very far but yeah it does sound like a pain in the %^& especially if you drop one and it rolls across the shop.

JBLUE · « **Reply #5 on:** March 30, 2016, 10:39:19 PM »

Waterbase works well on those.

News:

Author Topic: How would you print this? (Read 800 times)

Prosperi-Tees

How would you print this?

im_mcguire

Re: How would you print this?

Colin

Re: How would you print this?

Sbrem

Re: How would you print this?

Prosperi-Tees

Re: How would you print this?

JBLUE

Re: How would you print this?