« previous next »
Pages: [1]   Go Down

Author Topic: 25x36 screen rack  (Read 2775 times)

Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
25x36 screen rack
« on: June 13, 2016, 11:46:45 AM »
anyone have a source for the larger racks?
Logged

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1469
Re: 25x36 screen rack
« Reply #1 on: June 13, 2016, 12:14:28 PM »
Logged
It's not a job if you love doing it.

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3527
Re: 25x36 screen rack
« Reply #2 on: June 13, 2016, 01:53:07 PM »
Quote from: Doug S on June 13, 2016, 12:14:28 PM
This is what I use:

http://www.ebay.com/itm/ADJUSTABLE-ALUMINUM-DRYING-RACK-SCREEN-PRINTING-NEW-/231971907965


we have like 6 of them, almost all of them arrived broken, and the company doesn't care. buyer beware.
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1469
Re: 25x36 screen rack
« Reply #3 on: June 13, 2016, 03:15:06 PM »
I must've got lucky on the 3 I bought.
Logged
It's not a job if you love doing it.

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3527
Re: 25x36 screen rack
« Reply #4 on: June 13, 2016, 03:26:03 PM »
every single one broke in the same spot to, just as we were tightening the bolt!
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
Re: 25x36 screen rack
« Reply #5 on: June 13, 2016, 10:59:11 PM »
This is what I'm scared of. No reputable screen supply companies sell them?
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4243
Re: 25x36 screen rack
« Reply #6 on: June 13, 2016, 11:54:25 PM »
Bakers racks made to hold the pan sideways fit 25" screens perfectly.
Ours are fully welded to boot.
Logged

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5854
  • Bottom Feeder
Re: 25x36 screen rack
« Reply #7 on: June 14, 2016, 07:35:49 AM »
Quote from: ericheartsu on June 13, 2016, 01:53:07 PM
Quote from: Doug S on June 13, 2016, 12:14:28 PM
This is what I use:

http://www.ebay.com/itm/ADJUSTABLE-ALUMINUM-DRYING-RACK-SCREEN-PRINTING-NEW-/231971907965


we have like 6 of them, almost all of them arrived broken, and the company doesn't care. buyer beware.


We have 8 of these, not a single issue. Love them!
Logged
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline BRGtshirts

  • Full Member
  • ***
  • Posts: 137
Re: 25x36 screen rack
« Reply #8 on: June 16, 2016, 12:04:16 PM »
Quote from: ebscreen on June 13, 2016, 11:54:25 PM
Bakers racks made to hold the pan sideways fit 25" screens perfectly.
Ours are fully welded to boot.

We also use baker racks from the local restuarant supply store. Took one rack, cut the cross supports and screwed in metal tubing to widen it to fit our 23x31's. Works like a champ. The best; however, I think are the racks whose trays/holders are not metal, but that pvc like plastic material. I think lower possibility for nicks on the mesh
Logged

Offline merchmonster

  • Sr. Member
  • ****
  • Posts: 421
Re: 25x36 screen rack
« Reply #9 on: June 20, 2016, 12:47:37 AM »
Logged
Merch Monster Screen Printing Embroidery and DTG Direct To Garment Printing
Servicing Oakland CA and the Greater San Francisco Bay Area
http://www.merchmonster.net

Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
Re: 25x36 screen rack
« Reply #10 on: June 29, 2016, 11:17:40 PM »
Yup, I ordered an eBay special and sure enough one of the wheels won't screw into the bottom of the rack. They are sending a replacement
Logged

Offline markdhl

  • Verified/Junior
  • **
  • Posts: 59
Re: 25x36 screen rack
« Reply #11 on: June 30, 2016, 06:42:40 AM »
Douthitt Corporation in Detroit, Michigan manufactures the most heavy duty screen racks.  All aluminum construction BUT the problem is not at the price of the cheap racks.  if interested call Mark Diehl at 313 515 8635

Mark
Logged
Pages: [1]   Go Up
« previous next »