« previous next »
Pages: [1]   Go Down

Author Topic: aluminum screen water inside problem  (Read 3319 times)

Offline Gabe

  • Sr. Member
  • ****
  • Posts: 483
  • If it`s not alive, I can print it.
aluminum screen water inside problem
« on: November 15, 2011, 06:04:51 PM »
Howdy team mates
i bought some aluminum screens six months ago
recently i notice water moving inside in some of them
i talk to my buddy the welder to plug the holes or fisures
any ways he charges more than i expected
you guys have any ideas on how to deal with this problem
thanks in advance
Logged

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: aluminum screen water inside problem
« Reply #1 on: November 15, 2011, 06:36:27 PM »
Where did you get them.  Seems like sometimes inexpensive is cheap.  Ours are guaranteed.
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline Gabe

  • Sr. Member
  • ****
  • Posts: 483
  • If it`s not alive, I can print it.
Re: aluminum screen water inside problem
« Reply #2 on: November 15, 2011, 07:00:44 PM »
i bought them use from a local decorator going out of biz
you got warranty on yours from who?
i was just thinking if i just use the stuff guys use at the bodyshop
might work to plug the holes
Logged

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2424
Re: aluminum screen water inside problem
« Reply #3 on: November 15, 2011, 07:30:03 PM »
I would not use Bondo.  But I would use JB Weld available everywhere.
Logged
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: aluminum screen water inside problem
« Reply #4 on: November 15, 2011, 07:50:08 PM »
we use two part epoxy. works great and it is cheap!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13957
  • Docendo discimus
Re: aluminum screen water inside problem
« Reply #5 on: November 15, 2011, 07:58:00 PM »
JB just adds a filler
Logged
That rug really tied the room together, did it not?

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: aluminum screen water inside problem
« Reply #6 on: November 15, 2011, 08:06:25 PM »
pump em full of this stuff
http://greatstuff.dow.com/
 we fill the square tube of our newmans with this stuff works great and very low cost.
mooseman
Logged
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: aluminum screen water inside problem
« Reply #7 on: November 15, 2011, 08:52:24 PM »
Quote from: screenxpress on November 15, 2011, 07:30:03 PM
I would not use Bondo.  But I would use JB Weld available everywhere.


I was going to recommend the same thing.

Quote from: mooseman on November 15, 2011, 08:06:25 PM
pump em full of this stuff
http://greatstuff.dow.com/
 we fill the square tube of our newmans with this stuff works great and very low cost.
mooseman


"great stuff" really is GREAT STUFF!

My shop is insulated with a similar type of thing... was amazing watching them apply that.
Logged

Offline Gabe

  • Sr. Member
  • ****
  • Posts: 483
  • If it`s not alive, I can print it.
Re: aluminum screen water inside problem
« Reply #8 on: November 15, 2011, 09:05:08 PM »
thank you fellas for the tips
we`ll get it done  ;)
good night
Logged

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: aluminum screen water inside problem
« Reply #9 on: November 15, 2011, 10:27:15 PM »
Silicone
Logged

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: aluminum screen water inside problem
« Reply #10 on: November 16, 2011, 07:58:12 AM »
Quote from: doublestroke on November 15, 2011, 07:00:44 PM
i bought them use from a local decorator going out of biz
you got warranty on yours from who?
i was just thinking if i just use the stuff guys use at the bodyshop
might work to plug the holes
Xenon
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5624
Re: aluminum screen water inside problem
« Reply #11 on: November 16, 2011, 08:16:55 AM »
Quote from: DKgrafix on November 15, 2011, 10:27:15 PM
Silicone
I would not recommend this. Silicone will eventually break down throughout the rigors of the screenmaking cycles and bits may break off and mix with ink, possibly rendering it useless.
Logged

Offline dsh

  • Full Member
  • ***
  • Posts: 157
Re: aluminum screen water inside problem
« Reply #12 on: November 16, 2011, 09:43:34 AM »
I have a couple like that and I 'retired' the screens to a job that comes up every now and then.  Example, the restaurant across the street needs a quick print when they get a new employee and I can print 6 shirts without much grief.
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5260
Re: aluminum screen water inside problem
« Reply #13 on: November 16, 2011, 10:30:48 AM »
If the hole not that big superglue...... speaking of jb weld I gotta get some
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!
Pages: [1]   Go Up
« previous next »