« previous next »
Pages: [1]   Go Down

Author Topic: Jacket clamp and mesh protectors  (Read 3183 times)

Offline Evo

  • Hero Member
  • *****
  • Posts: 928
  • Anything is possible.
Jacket clamp and mesh protectors
« on: December 02, 2011, 08:42:28 PM »
For sale, best offer:


A&M 16" x 16" jacket clamp, ok condition.

Needs:
New gas springs
A good cleaning

I've never used it. Rubber is in great shape, but needs the old pallet tape cleaned off. Has an M&R pallet bracket, but it looks like it once had a Hopkins/Workhorse bracket mounted on it.
Parts can most likely be obtained from Atlas Screen Supply (formerly A&M). Clamp is very similar to this one:
http://www.atlasscreensupply.com/atlas_printing_accessories.htm#Gripmaster


Also:

Mesh protector tubes for 23x31 Newman M3 frames or similar. Most need cleaning. (old plastisol, etc)
Approx 30 or so long tubes for the 31" sides, and approx 25 or so short tubes for the 23" sides.


Best offer on either. Actually for the mesh protectors, you pay shipping and they're free.

Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Jacket clamp and mesh protectors
« Reply #1 on: December 02, 2011, 08:45:51 PM »
How much for the jacket hold down? I WANT IT!!!
Logged

Offline Evo

  • Hero Member
  • *****
  • Posts: 928
  • Anything is possible.
Re: Jacket clamp and mesh protectors
« Reply #2 on: December 02, 2011, 08:52:29 PM »
Quote from: endless ink printing on December 02, 2011, 08:45:51 PM
How much for the jacket hold down? I WANT IT!!!

Dunno. Best offer.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline Evo

  • Hero Member
  • *****
  • Posts: 928
  • Anything is possible.
Re: Jacket clamp and mesh protectors
« Reply #3 on: December 02, 2011, 08:53:59 PM »
By the way that is NOT burn marks on the pallet rubber, it's just old linty tape that was taking too long to peel off while I had packing to do...
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Jacket clamp and mesh protectors
« Reply #4 on: December 02, 2011, 09:21:48 PM »
Quote from: Evo on December 02, 2011, 08:53:59 PM
By the way that is NOT burn marks on the pallet rubber, it's just old linty tape that was taking too long to peel off while I had packing to do...

just sent you my offer via private message, let me know what's up
Logged

Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: Jacket clamp and mesh protectors
« Reply #5 on: December 03, 2011, 03:04:11 PM »
Let me know what you get for the hold down if you don't mind. I have a M&R Jacket hold down as well as a shorts / umbrella that I am trying to get rid of.  Not sure what to ask for but they are in good to excellent condition

Logged
Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW Master® 

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: Jacket clamp and mesh protectors
« Reply #6 on: December 05, 2011, 07:19:08 PM »
Fluid let me know what your thinking once you settle on a price
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Jacket clamp and mesh protectors
« Reply #7 on: December 05, 2011, 08:27:38 PM »
Quote from: sweetts on December 05, 2011, 07:19:08 PM
Fluid let me know what your thinking once you settle on a price


errr nevermind....
Logged

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Jacket clamp and mesh protectors
« Reply #8 on: December 05, 2011, 08:29:29 PM »
Thanks Evo!!!
Logged

Offline girard78

  • Newbie
  • *
  • Posts: 2
Re: Jacket clamp and mesh protectors
« Reply #9 on: December 06, 2011, 06:34:17 PM »
I want those mesh protectors, my address is:

Match Play CUstom Apparel
439 Central Ave Suite 121
Rochester, NY 14605

Let me know a price and I will pay pal you.

Also what you thinking on the Jacket clamp? 
Logged

Offline Evo

  • Hero Member
  • *****
  • Posts: 928
  • Anything is possible.
Re: Jacket clamp and mesh protectors
« Reply #10 on: December 06, 2011, 07:05:39 PM »
Quote from: girard78 on December 06, 2011, 06:34:17 PM
I want those mesh protectors, my address is:

Match Play CUstom Apparel
439 Central Ave Suite 121
Rochester, NY 14605

Let me know a price and I will pay pal you.



Cool, I'll get you a ship cost tomorrow.

Quote from: girard78 on December 06, 2011, 06:34:17 PM

Also what you thinking on the Jacket clamp?

Sold already. Cheers.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: Jacket clamp and mesh protectors
« Reply #11 on: December 06, 2011, 07:40:18 PM »
Hey Evo, if its not too late you can send that jacket hold down to Match Play , he's just down the street. My contract printer. Save shipping cost shipping both at once for hooking me up!
Logged
Pages: [1]   Go Up
« previous next »