Author Topic: MANUAL PRESS AND STUFF FOR SALE  (Read 1580 times)

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
MANUAL PRESS AND STUFF FOR SALE
« on: March 30, 2022, 06:23:23 PM »
Retired old fart selling his junk PM me with questions / details.
Prefer to sell as package $9500.00 for everything listed below.
Ask any questions
mooseman
=== SPECIFICS =====

VASTEX V-2000  PRESS
6 COLOR - 6 STATION PRINT PRESS MODEL VASTEX V-2000

Press is in excellent working order, clean, with new pallet rubber and shoulder boards.
This is an all heads down press
Working diameter is approximately 8 foot 4 inches diameter. Fully assembled weight 750 pounds.
Press is currently  transport ready, print head assemblies and pallet assemblies are unbolted from the center bearing column. Each assembly is complete ready for 4 bolt reattachment . Reassembly requires only a single 9/16 wrench, estimated re-assembly time is less than 1 hour 

VASTEX INFREDRED CONVEYOR DRYER VASTEX ECNORED-1
30 inch conveyor dryer is clean ready for work. This unit has never been operated above an 800 degree panel temp setting.
The conveyor belt is less than 1 year old and in excellent condition.
Power requirement is 220V single phase, 16 amps for the heater and 110 for the variable speed belt drive.
Assembled weight is @ 165 pounds disassembles for easy transport

VASTEX SCREEN EXPOSURE UNIT
Unit is in excellent working order, clean and has a new vacuum blanket .
This is a  fluorescent  tube unit with a 40 watt tube up grade option when purchased.
Vacuum pump and original  glass are in excellent shape. The black squares on the glass  are rubber pads used to protect the glass from the metal screen frame contact damage.
Some extra 40 watt  fluorescent tubes are included

VASTEX REDI-FLASH WITH STAND AND LOCKING CASTER WHEELS.

18 X 18 INCH 3500 WATT OUTPUT , 220 volt single phase 9 amp.
Flash is in excellent working order

THE FOLLOWING ITEMS ARE INCLUDED
30 NEWMAN TYPE MXZ SQUARE BAR ALUMINUM RE-TENSIONABLE ROLLER FRAMES,
some with mesh some without. Included are sever panels of new Sefar and Smart Mesh.

110 VOLT DIY  6- SCREEN DRYER CABINET, 
110 volt heater , thermostat control, and circulating fan.
Dimensions 49 inches high, 25 inches wide, 29 inches deep.

24 SCREEN STORAGE CABINET LIGHT TIGHT
Construction is ¾ inch cabinet grade ply.
54 inches high 48 inches wide  28 inches deep

18 SCREEN STORAGE CABINET,   LIGHT AND AIR TIGHT
33 inches wide      29 inches deep      66 inches high

STOCK OF PLASTISOL INK
SOME SQUEEGEES
EPSON 3000 FILM PRINTER
Prints  super dark films without using a RIP.
SOME PROCESSING CHEMICALS
« Last Edit: March 31, 2022, 05:02:23 PM by mooseman »
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.


Offline Scobey Peterman

  • Sr. Member
  • ****
  • Posts: 495
Re: MANUAL PRESS AND STUFF FOR SALE
« Reply #1 on: May 02, 2022, 03:42:07 PM »
I have been working to move home for the last 8 months.  It is done.

I have been printing from home for 2 months.  It is great!!!

Sold my building and all of the property that has been in my family for at least 60 years.

Good luck to you no the retirement!!!!!
Quality over Quantity

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: MANUAL PRESS AND STUFF FOR SALE
« Reply #2 on: May 02, 2022, 06:39:40 PM »
Hi Scobey,
Thank you for the note . I have gutted my print shop and turned it into my woodworking man cave. Don't miss printing tee shirts as I kind of replaced that effort with making saw dust. This is what my tee shirts look like now. Can't wait to have a small gallery to maybe sell some of this stuff.
Best of luck to you have  great success in 2022.
mooseman

« Last Edit: May 02, 2022, 06:41:57 PM by mooseman »
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.