« previous next »
Pages: [1]   Go Down

Author Topic: Discharge or Plastisol  (Read 804 times)

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Discharge or Plastisol
« on: April 06, 2012, 12:32:45 AM »
I am going to print these shirts next week. What I am debating is the gray in the image. I want it to be more background than on top if that makes sense. I am wondering would you do a dark gray discharge or a 80/20 curable reducer and plastisol?
Logged

Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1700
Re: Discharge or Plastisol
« Reply #1 on: April 06, 2012, 12:46:00 AM »
Gray discharge on charcoal/asphalt t's? Just do gray waterbase. Or gray plastisol one stroke high tension / mesh. That gray dcharge on that color garment could give you undesirable results. I would recommend test prints
Logged

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Discharge or Plastisol
« Reply #2 on: April 06, 2012, 12:59:03 AM »
Actually it will be on black Ts. What mesh? I was thinking 230.
Logged

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Discharge or Plastisol
« Reply #3 on: April 06, 2012, 09:39:53 AM »
230-305 is what I would use. Base out the gray and run it. Either way waterbase or based out plastisol will work just fine.
Logged
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin
Pages: [1]   Go Up
« previous next »