« previous next »
Pages: [1]   Go Down

Author Topic: Drummer's Bass Head printing  (Read 1776 times)

Offline NoDirectionNick

  • Verified/Junior
  • **
  • Posts: 20
Drummer's Bass Head printing
« on: September 12, 2012, 02:04:24 PM »
Anyone have any experience with printing on bass drum heads? Not sure what the best route is on getting something like this done for a client. n00b here. Help would be much appreciated. Thanks guys!
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5260
Re: Drummer's Bass Head printing
« Reply #1 on: September 12, 2012, 02:37:01 PM »
I don't know a thing about drums, but the first thing is to know what the basshead is make of (insert joke here, CRACK!!!!) lol fisrt to choose a ink to be printed on it.  Simlpe water base ink should work since its air dry, but I,m thinking Nazdar screen Inks would be a good source for your answer.  Far as printing any nice flat surface you can lay the drum on will work unless your doing a multi color print that needs tight registration, then you might have to get a special pallet make.

Darryl
« Last Edit: September 12, 2012, 02:44:10 PM by 3Deep »
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Online ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3527
Re: Drummer's Bass Head printing
« Reply #2 on: September 12, 2012, 02:41:29 PM »
Air dry inks for sure.

use a higher mesh screen, 305 or 355.

we built a platten out of some paper that we had. try and have smoething hard under it so it doesn't flex when pressure is put on it.
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13956
  • Docendo discimus
Re: Drummer's Bass Head printing
« Reply #3 on: September 12, 2012, 03:03:29 PM »
If one color, I'd consider sign vinyl.
Logged
That rug really tied the room together, did it not?

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3166
Re: Drummer's Bass Head printing
« Reply #4 on: September 12, 2012, 03:21:25 PM »
we use vinyl like frogger, way easier. . .  just be aware it will change the tone of the drum.
Logged
...keep doing what you're doing, you'll only get what you've got...

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: Drummer's Bass Head printing
« Reply #5 on: September 12, 2012, 03:32:06 PM »
I think they are made of polyester, I would think a MP solvent based ink would bite, Heck vinyl ink would be worth a try too.
Logged
Wishin' I was Fishin'

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5260
Re: Drummer's Bass Head printing
« Reply #6 on: September 12, 2012, 03:33:40 PM »
Homer thats why they most likely don't won't vinyl use

D
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: Drummer's Bass Head printing
« Reply #7 on: September 12, 2012, 03:37:41 PM »
Cut stencil out of vinyl spray paint remove stencil bada boom done.

Sent  from samsung gem(the worst smart phone ever)
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: Drummer's Bass Head printing
« Reply #8 on: September 12, 2012, 03:41:36 PM »
Quote from: sweetts on September 12, 2012, 03:37:41 PM
Cut stencil out of vinyl spray paint remove stencil bada boom done.

Sent  from samsung gem(the worst smart phone ever)

now that's an idea! very elegant and effective!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5260
Re: Drummer's Bass Head printing
« Reply #9 on: September 12, 2012, 05:57:29 PM »
Quote from: blue moon on September 12, 2012, 03:41:36 PM
Quote from: sweetts on September 12, 2012, 03:37:41 PM
Cut stencil out of vinyl spray paint remove stencil bada boom done.

Sent  from samsung gem(the worst smart phone ever)

now that's an idea! very elegant and effective!

pierre
I'll have to second that allso, good idea, and it won't change the tone much at all if any

Darryl
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5623
Re: Drummer's Bass Head printing
« Reply #10 on: September 13, 2012, 09:17:21 AM »
Be sure to apply the stencil with Hobbyist removable mist adhesive if you go this way
Logged

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13956
  • Docendo discimus
Re: Drummer's Bass Head printing
« Reply #11 on: September 13, 2012, 09:32:21 AM »
Quote from: tonypep on September 13, 2012, 09:17:21 AM
Be sure to apply the stencil with Hobbyist removable mist adhesive if you go this way

I assumed a  removable adhesive vinyl.
Logged
That rug really tied the room together, did it not?

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5623
Re: Drummer's Bass Head printing
« Reply #12 on: September 13, 2012, 09:41:31 AM »
Either or.
Logged

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: Drummer's Bass Head printing
« Reply #13 on: September 13, 2012, 11:58:27 AM »
Yeah just a calendar vinyl I did a door for a friend it looked alright

Sent  from samsung gem(the worst smart phone ever)
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline NoDirectionNick

  • Verified/Junior
  • **
  • Posts: 20
Re: Drummer's Bass Head printing
« Reply #14 on: September 17, 2012, 02:40:03 PM »
Sorry I haven't been able to respond until now. I appreciate all the advice/tips!
Logged
Pages: [1]   Go Up
« previous next »