What have you printed lately?

[AntonySharples]

We do boring stuff for the most part, but here is one we just printed for some MP's.
[/img]

[Parker 1]

3 color DC print. 

[mk162]

did you mean to mis-spell imaging?

[mimosatexas]

[Denis Kolar]

did you mean to mis-spell imaging?

Brad, you are imageining things

[Parker 1]

Damn

[Doug S]

It's definitely happened to me before. Once on a 200 piece order.  Never a good feeling.

[alan802]

Other than that, damn good.  What if anything did you do around the zipper area?  We bought a zipper pallet from Action 18 months ago and have yet to print one job with it.  I knew it was a bad idea but we had one salesperson who thought she'd sell a ton of them if we just had that pallet...

[Parker 1]

It's definitely happened to me before. Once on a 200 piece order.  Never a good feeling.

Good thing about this it was just a test.  I'm pissed b/c it was my hoodie that is all jacked up now.  Other than that its just a few pigment died shirts to test DC.

Other than that, damn good.  What if anything did you do around the zipper area?  We bought a zipper pallet from Action 18 months ago and have yet to print one job with it.  I knew it was a bad idea but we had one salesperson who thought she'd sell a ton of them if we just had that pallet...

Testing different materials, I used a thin sponge material (app. 1/8") and was getting my best results just will not work on longer runs which is what I need.  I will probably reach out to Rick and see if I can just pay him for his knowledge on this, I am out of time and after this I have lost the desire to continue testing.

[Doug S]

This one we just finished this morning and was a challenge for me because the file was given to me as a 300 dpi but only 1 inch tall.  When I asked the customer if he could get me a larger image he couldn't because his designer  was out of town.   Even on the final print it was only 4 inches tall.  This was 8 colors and that was the most amount of colors in a print we've done without revolving on our 10 color sportsman.  I was worried that it might muddy up a bit in 700 prints but thank God for higher tension screens and sharper squeegees. 

[DannyGruninger]

Here's a print we are running today..... Scott did the seps on this one and it ended up being 6 colors plus 2 whites including the base. Have 14,000 of these badboys to start printing today, going to be green around here for a bit..... LOL

[3Deep]

Danny that is freaking nice!!!!

[ZooCity]

gol' darn impressive Danny

[DannyGruninger]

Thanks guys, here's full specs on this job...... 65 lpi, 22.5 angle

Single Stroke on all colors

1. Underbase 205 mesh - double bevel blade
2. Blue 293 272 mesh - 65/90/65
3. Green 361 272 mesh - 70/90/70
4. Gold 144 272 mesh - 70/90/70
5. Red 185 272 mesh - 75/90/75
6. Yellow 102 272 mesh 70/90/70
7. Custom Black 305 mesh - 70/90/70
8. Top White 272 mesh - 75/90/75

Pretty straight forward on the print for these

[ZooCity]

how many flashes/cool downs for you on something like this?