What have you printed lately?

[mimosatexas]

Wait, are you printing plastisol on top of a straight out of the can white discharge base?  Have you wash tested?

NO, Mix of DBase and DWhite, sorry should have been more specific.  Been doing it over a year now with no issues.  Now that I think of it 90% of our jobs we run a DC under base. 

Chris

Ah, ok.  Makes more sense.  What mix do you use?  We typically use 20% white, 80% base.

[tonypep]

All great stuff. If you can get past the DC/UB and begin to collect a library of DC colors then you will have breached the next level; achieving a continuous tone. Scary perhaps but doable. Not allowed to post current work. The Ron Jon shirt appears to be closest to this however I believe its the dreaded plas.........so great job on that. Congrats on this long thread its my favorite. Inspiring to say the least.

[mpot]

The last couple of posted print are Really Really nice,  congrats.
Matt

[Orion]

Really nice prints posted up lately!

Here is a recent 7 color sim process...

 

[Doug S]

Nothing as elaborate as what I've seen here but here is one we are printing tomorrow.  Just ran off a sample  I've just ran noticed the topic of sep studio and that's the program I used for this.  It's kind of hard to adjust channels by just what you see on screen.  I thought I was borderline over saturating the red and yellow but to me it looks like it could've used a touch more of both of those.  Anyway this was six colors

[ebscreen]

Finally got the photographing thing down.

First up is 4 color discharge owl, 230-280

Not sure if I posted the Winger shirt, 3 colors, discharge, all 280.

KVH is 3 color discharge 280-305.

And last is a three color plastisol.

[mimosatexas]

Where'd you get the mannequin bust?  I really like it.  Great prints as well.

[Dottonedan]

14 colors, 280 & 355 mesh, 55lpi

CastleKing,


You've got it down man. The mesh selection and person that separated it is perfect.


Good stuff.

[Dottonedan]

Some good stuff, I have always liked the beach/surf designs. 

One we are running this morning.  6 colors 230-330 mesh @ 55lpi

Chris,
This is killer also.  Tons of great prints being shown/shared. LOVE LOVE LOVE it.

[Dottonedan]

Nothing as elaborate as what I've seen here but here is one we are printing tomorrow.  Just ran off a sample  I've just ran noticed the topic of sep studio and that's the program I used for this.  It's kind of hard to adjust channels by just what you see on screen.  I thought I was borderline over saturating the red and yellow but to me it looks like it could've used a touch more of both of those.  Anyway this was six colors

SHirtshack,


Very nice job. You are showing great results lately!  NICE.

[Doug S]

Thanks Dan.  I appreciate that.

[Underbase37]

I got a chance to see some of Danny's prints in person. & I will say my hats off to him & his team. They look as good ( if not better ) in person. Nice work.

Murphy37

[Underbase37]

A few old ones to keep it going. Not as exciting as some of the stuff being posted here but they looked nice.
The poster was what I was asked to mach.
We did a few deferent girls & they where all a lot of fun.





Murphy37

[Dottonedan]

Nice prints.  Nothing wrong with those.
Love that raptor art. Looks like it originally was poster.  Nice style.

[Doug S]

Very nice underbase.  Looks like an exact match.