« previous next »
Pages: [1]   Go Down

Author Topic: MSP 3140 and Discharge...  (Read 923 times)

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
MSP 3140 and Discharge...
« on: April 27, 2014, 04:09:19 PM »
This was inspired by another thread, but here goes.  Since this is a widely popular unit and many of us have one, lets assume we have a BRAND new bulb and factory calibrations, using film:  Those who are exposing for discharge, what emulsion and how many ltu?
« Last Edit: April 27, 2014, 04:14:13 PM by dirkdiggler »
Logged
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline Evo

  • Hero Member
  • *****
  • Posts: 950
  • Anything is possible.
Re: MSP 3140 and Discharge...
« Reply #1 on: April 27, 2014, 04:21:26 PM »
Quote from: dirkdiggler on April 27, 2014, 04:09:19 PM
This was inspired by another thread, but here goes.  Since this is a widely popular unit and many of us have one, lets assume we have a BRAND new bulb and factory calibrations, using film:  Those who are exposing for discharge, what emulsion and how many ltu?

I can give a range of maybe 150 to 350?

Variables:

Mesh thread count
Mesh thread diameter
Mesh color
Emulsion brand and type
Humidity
Scoop coater edge
Coating method
Final EOM
Film clarity (or lack thereof)
True voltage at the outlet and whether the unit was adjusted for it


Etc, etc.

You can get a ball park here but the only way to tell is to test and re-test for each variable.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: MSP 3140 and Discharge...
« Reply #2 on: April 27, 2014, 04:24:49 PM »
good points, that's about our range aswell. 
Logged
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender
Pages: [1]   Go Up
« previous next »