Author Topic: Gas Dryer  (Read 7377 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Gas Dryer
« on: April 01, 2022, 08:29:07 AM »
We are looking for a Gas Dryer for our Shop. Prefer a 48" wide Belt. We are in Arkansas.
Thx


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7792
Re: Gas Dryer
« Reply #1 on: April 01, 2022, 08:50:40 AM »
I'd recommend a Precision MD-8 or Airjet.  I will say I think they could insulate the base of the MD-8 a little better, they might do that for an upgrade. We changed ours around with the belt direction and a few other things.  It's worth checking out.

Online blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: Gas Dryer
« Reply #2 on: April 01, 2022, 09:45:21 AM »
there is a used MD-8 on digitsmith right now.

very good dryer.

our M&R 2000 is better insulated and puts out less fumes into the space, but the not as reliable (but not bad either).

I think Air Jet would be my first choice now, but never owned one so just guessing.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2870
Re: Gas Dryer
« Reply #3 on: April 01, 2022, 10:08:38 AM »
Are you looking for used or new?

We have a used Precision from the 90's. Runs like a top. Puts off a good amount of heat, but we build basically a insulation jacket around it and a few years ago it cost us about $3/day to run...

Hated the anatol gas dryer we had.

We have what Roq is now calling the "Sahara". We beta tested it for them ours still has the "tunnel" stickers on it. With the changes, the thing is absolutely amazing. We are a over 90% discharge shop. Previously our old dryer had a front and back hood with a exhaust fan connected. Then we had 3 other roof/wall power exhausts. If we ran 2 discharge jobs with a full front it would still smell and be smoky in here. With the new Sahara, we only use the exhaust that is connected to the dryer, NO other exhaust and you would never know we print discharge from smell or smoke. The thing is amazing. They also fixed the gas errors the first generation had and raised the internal burner height. It was not cheap, but I love the new one!
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6041
Re: Gas Dryer
« Reply #4 on: April 01, 2022, 10:18:03 AM »
We are very happy with our MD-8, 4 years old, trouble free. A little maintenance goes a long way. In our old shop we had a pair of old Advance Tex-Airs, quite old, but still running when we moved. You probably won't see any of those out there, if you do, they'll be 30+ years old.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2056
Re: Gas Dryer
« Reply #5 on: April 05, 2022, 03:55:42 AM »
You cannot go wrong with a Tesoma dryer.