Author Topic: Small "tag" prints on back. Position?  (Read 2817 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Small "tag" prints on back. Position?
« on: April 29, 2024, 06:23:41 PM »
Where do you place the small pocket or sleeve sized prints we sometimes print on the backs of T's?
Let's use a business card size, 3.5" wide 2" tall as an example. I'm favoring 2" to the design top from the collar opening, (or 1.5" from the seam)
You guys similar?
That rug really tied the room together, did it not?


Offline rusty

  • Hero Member
  • *****
  • Posts: 502
Re: Small "tag" prints on back. Position?
« Reply #1 on: April 29, 2024, 07:37:59 PM »
I usually do 2 inches from below collar to top of graphic, or three fingers.


Offline Admiral

  • Hero Member
  • *****
  • Posts: 886
Re: Small "tag" prints on back. Position?
« Reply #2 on: May 02, 2024, 12:36:56 PM »
We do 1" from the bottom of the collar.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Small "tag" prints on back. Position?
« Reply #3 on: May 02, 2024, 01:00:27 PM »
I went in-between you two guys' position and am two fingers below the seam, about 1.5"
That rug really tied the room together, did it not?

Offline Atownsend

  • !!!
  • Sr. Member
  • ****
  • Posts: 421
Re: Small "tag" prints on back. Position?
« Reply #4 on: May 02, 2024, 05:26:49 PM »
I went in-between you two guys' position and am two fingers below the seam, about 1.5"

Yup 2 fingers for a back tag. Only dorks use rulers LOL!

Offline Admiral

  • Hero Member
  • *****
  • Posts: 886
Re: Small "tag" prints on back. Position?
« Reply #5 on: May 03, 2024, 02:17:50 PM »
I went in-between you two guys' position and am two fingers below the seam, about 1.5"

Yup 2 fingers for a back tag. Only dorks use rulers LOL!

We use lasers :)

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1877
Re: Small "tag" prints on back. Position?
« Reply #6 on: May 03, 2024, 04:28:46 PM »
We let customers decide. Make a note of it on spec sheet.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
Re: Small "tag" prints on back. Position?
« Reply #7 on: May 03, 2024, 05:27:50 PM »
Exactly, and "Lasers". Shark optional.

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2071
Re: Small "tag" prints on back. Position?
« Reply #8 on: May 04, 2024, 07:48:43 AM »
3 cm from the bottom of the neck.