Exposure Unit Recommendations

[AntonySharples]

Pierre is on CCI Nexus emulsion now.  If you have run PHU 2, the data numbers are almost identical.  48% solids.  It's great for plastisol, wb, d/c.  Long runs or D/C you can add diazo.  Nothing really changed with exposure as far as I know.  It did however shore up pin holes that were becoming a problem with some emulsions.

CCI LXP is optimized for LED.  You can get 4-5 sec exposure on an I Image STE and most LED units. 

[CBCB]

Pierre is on CCI Nexus emulsion now.  If you have run PHU 2, the data numbers are almost identical.  48% solids.  It's great for plastisol, wb, d/c.  Long runs or D/C you can add diazo.  Nothing really changed with exposure as far as I know.  It did however shore up pin holes that were becoming a problem with some emulsions.

CCI LXP is optimized for LED.  You can get 4-5 sec exposure on an I Image STE and most LED units.

Is is freeze stable? I loved PHU for that but the PHU-HR we are on now is not stable and causing issues.


Sent from my iPhone using Tapatalk