Whose Gold ink do you use???

[Scobey Peterman]

I want to p/f/p Gold on royal 100% cotton shirts.  Whose gold ink do you use??

Thanks.

[Zelko-4-EVA]

Wilflex Liquid Gold

[tonypep]

Agreed

[Scobey Peterman]

I need it to be school bus gold.

[tonypep]

Then Union Maxopaque gold

[JayzTeez]

WM Yellow Gold

[Sbrem]

We use the union maxopaque... though I prefer a white underlay for longer runs, with 2 screens, but you'll get what you're looking for your way too...

Steve

[alan802]

Union Maxopake Golden Yellow.  It looks ok pfp but it looks better with a white UB.

[ebscreen]

There was a thread on a long lost board where a rep. from Union mentioned that the Maxopaques were
really intended for getting opacity on small fine line left chest stuff and not full coverage areas.

(PS with a PC system and thickener you can make your own opaques)

[sportsshoppe]

one stroke

[Zelko-4-EVA]

There was a thread on a long lost board where a rep. from Union mentioned that the Maxopaques were
really intended for getting opacity on small fine line left chest stuff and not full coverage areas.

(PS with a PC system and thickener you can make your own opaques)

we have used Wilflex Amazing Base with our PC system to get a nice opaque shade that wasnt available in the Union Maxopaque series.   

Im going to try the thickener  - i have about 4 gallons of Rutland thickener #10 i need to use up. 

[Frog]

I'm using pre-CPSIA IC HP Golden Yellow, and though I prefer an underbase, I p-f-p plenty of times.
Yellow, however, does not cover as well as one owuld hope, but good EOM helps a lot.

Not part of your question, but when I have to match a Pantone, or a vinyl with a Pantone number, I have used my Union Mixopake system.
Last time, with Sun Yellow Easy Weed film from Siser (their redder Golden Yellow), I just added 1% Mixopake Red y/s to my IC.

[ebscreen]

There was a thread on a long lost board where a rep. from Union mentioned that the Maxopaques were
really intended for getting opacity on small fine line left chest stuff and not full coverage areas.

(PS with a PC system and thickener you can make your own opaques)

we have used Wilflex Amazing Base with our PC system to get a nice opaque shade that wasnt available in the Union Maxopaque series.   

Im going to try the thickener  - i have about 4 gallons of Rutland thickener #10 i need to use up.

Only familiar with the powdered stuff (Cab-O-Sil so they tell me) so don't come a gunnin' for me if the liquid
doesn't perform as intended!

Works for making HD's as well. Neat stuff.

[Screened Gear]

Union Maxopake Golden Yellow.  It looks ok pfp but it looks better with a white UB.

Yellow is one ink I print alot (and hate) i would strongly suggest an underbase. You can get away with it but with the underbase the color is perfect every time.

[jasonl]

thats the color of my logo and it looks best with pms 1235 with white underbase or sericol discharge yellow rs.