« previous next »
Pages: [1]   Go Down

Author Topic: Need source  (Read 2010 times)

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Need source
« on: August 16, 2013, 12:17:29 PM »
See pic below. That is our pneumatic hose to our compressor. This morning it blew, sounded like a rifle shot. This hose is over 15 years old and I have no clue where we got it from. Need to find a place that sells it custom length and specified fittings. PSI over 100. TIA
Logged
"No man is an island"

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4311
Re: Need source
« Reply #1 on: August 16, 2013, 12:22:49 PM »
I'd bet a hydraulic hose shop could make one for you.

That said, the Goodyear or Firestone airline, barbs, and hose clamps, will easily
hold 100PSI+.
Logged

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5876
  • Bottom Feeder
Re: Need source
« Reply #2 on: August 16, 2013, 12:27:00 PM »
Yup hydraulic shop can make it.  We have one similar.  They are not cheap though. 
Logged
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline aauusa

  • Hero Member
  • *****
  • Posts: 827
Re: Need source
« Reply #3 on: August 16, 2013, 12:36:04 PM »
if you have a good auto supply shop not a chain like auto zone etc but a good one they will be able to do it also.  those hoses are also used for air brake lines and such.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6395
Re: Need source
« Reply #4 on: August 16, 2013, 12:45:38 PM »
harbor freight used to sell hoses. They were available in many sizes and few diameters. You should be able to pick one up and make it work for $50-$100. 'put you back up to work the same day.

pierre
Logged
Working on a new web page, we have two for now. Bluemoonscreenprint.com and promodecorators.com.

Offline T Shirt Farmer

  • Hero Member
  • *****
  • Posts: 843
Re: Need source
« Reply #5 on: August 16, 2013, 01:24:37 PM »
Take few minutes and secure that hose to the wall every couple of feet, 5' of broken hose with 100 psi going thru it whips around like crazy and can really put a hurt on any one close
Logged
Robert
allpremiums.com
Your Source for Decorated Apparel.

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Need source
« Reply #6 on: August 16, 2013, 01:50:48 PM »
Quote from: T Shirt Farmer on August 16, 2013, 01:24:37 PM
Take few minutes and secure that hose to the wall every couple of feet, 5' of broken hose with 100 psi going thru it whips around like crazy and can really put a hurt on any one close

There is two clamps lagged to the wall and floor at the corner just out of view and one more clamp where it turns up at that press. Surprisingly the hole is quite small but dumps air like mad, still running the press tho the compressor is kicking on quite often.
Logged
"No man is an island"

Offline MrBreeze

  • !!!
  • Full Member
  • ***
  • Posts: 108
Re: Need source
« Reply #7 on: August 16, 2013, 02:31:47 PM »
NAPA Auto Supply
Logged
If it's so easy, you do it.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5372
Re: Need source
« Reply #8 on: August 16, 2013, 02:42:28 PM »
Speaking getting hose whipped, I worked on a pipe fitting and welding crew, I was the one who had to hold the fire hose in case of a fire.  I accidentally hit it full blast and my azz went for a quick ride, I knew not to let it go or I would have got hurt bad.  Ok sorry for the derail

Darryl
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline tpitman

  • Gonzo Member
  • ******
  • Posts: 1059
Re: Need source
« Reply #9 on: August 16, 2013, 02:47:33 PM »
Amazon Hose & Rubber in Orlando. I've had them make auto A/C hoses and some oil lines for my Sporty that the dealer said was "obsolete" . . .

http://www.amazonhose.com
Logged
Work is the curse of the drinking class . . .

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: Need source
« Reply #10 on: August 16, 2013, 05:35:41 PM »
Regular air-line with fitting and hose clamps will work to 200PSI.
Logged
Wishin' I was Fishin'
Pages: [1]   Go Up
« previous next »